BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Mentor Safety Consultants - A Safety Co Partner - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Mentor Safety Consultants - A Safety Co Partner
X-ORIGINAL-URL:https://mentorsafety.com
X-WR-CALDESC:Events for Mentor Safety Consultants - A Safety Co Partner
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20220902T083000
DTEND;TZID=UTC:20220902T163000
DTSTAMP:20260503T102019
CREATED:20220727T165918Z
LAST-MODIFIED:20220727T170130Z
UID:13725-1662107400-1662136200@mentorsafety.com
SUMMARY:London Working At Heights (September 2\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-sept-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220906T083000
DTEND;TZID=UTC:20220906T123000
DTSTAMP:20260503T102019
CREATED:20220727T135036Z
LAST-MODIFIED:20220727T140105Z
UID:13639-1662453000-1662467400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 6\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-6/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220908T083000
DTEND;TZID=UTC:20220908T163000
DTSTAMP:20260503T102019
CREATED:20220629T145804Z
LAST-MODIFIED:20220906T172735Z
UID:13429-1662625800-1662654600@mentorsafety.com
SUMMARY:Virtual JHSC Refresher (September 8\, 2022)
DESCRIPTION:Program Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $240.00 + HST \nVirtual Learning: This is a situation in which the instructor and learners are separated by location. By the use of webcams\, the instructor will lead the training in real-time and will move through the learning outcomes together with the learners virtually. \nTechnology Requirements: The class will be hosted using Zoom and participants will need to use a webcam for certain parts of the training such as I.D verification and engagement monitoring. \nParticipants will need:\n-A quality internet connection\n-A computer (laptop\, desktop or tablet)\n-A webcam with a microphone \nJoint Health and Safety Refresher Training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their JHSC training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact a JHSC’s across all industries. \nJoint Health and Safety Refresher Committee Modules \n\nCertification\nInternal Responsibility System (IRS)\nLaws and Regulations\nPolicy and Programs\nThe Committee\nR.A.C.E\nHealth and Safety Hazards\nHazard Management Tools\nStaying Current\nChallenges and Successes\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed the Part 1 & 2 CPO approved  Joint Health and Safety Committee program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nShipping Details: We will ship each participant a package with the required materials for the program. Participants must register 5 business days prior to the class and provide a shipping address. \nParticipants must bring their copy of the Occupation Health and Safety Act (OHSA\, Green Book). \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/virtual-jhsc-refresher-sept-8/
LOCATION:Virtual Classroom\, Ontario\, Canada
CATEGORIES:Greater London Area,Greater Niagara Area,Virtual Classroom,Virtual Joint Health and Safety Committee Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2020/01/jhsc-refresher-e1623697820406.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220910T083000
DTEND;TZID=UTC:20220910T163000
DTSTAMP:20260503T102019
CREATED:20220727T170328Z
LAST-MODIFIED:20220727T170525Z
UID:13729-1662798600-1662827400@mentorsafety.com
SUMMARY:London Working At Heights (September 10\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-sept-10/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220912
DTEND;VALUE=DATE:20220915
DTSTAMP:20260503T102019
CREATED:20220727T180531Z
LAST-MODIFIED:20220727T180713Z
UID:13788-1662940800-1663199999@mentorsafety.com
SUMMARY:In-Class JHSC Part 1 (September 12-14\, 2022) -London
DESCRIPTION:Course Length: 3 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/3″ center=”no” class=””] \nDay 1 of 3 \n\nIRS\nLaw & Regulations\nMethods of Enforcement\nRights & Responsibilities\nThree Rights (know\, participate\, refuse)\nPolicies\, Procedures & Programs\nJHSC\nCertified Members[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 2 of 3 \n\nRACE\nHealth Hazards\nSafety Hazards\nPEMEP\nRoutes Of Entry\nRecognizing the Hazards\nInspections\nExposure Monitoring[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 3 of 3 \n\nHazard Assessment\nJob Hazard Analysis\nExposure Monitoring\nControlling Hazards\nMLTSD Investigations\nHealth and Safety Resources\nMinistry of Labour Final Examination[/su_column]\n[/su_row]\n\nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \n 
URL:https://mentorsafety.com/training-course/in-class-jhsc-part-1-sept-14/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Joint Health and Safety Committee (Part 1)
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220915
DTEND;VALUE=DATE:20220917
DTSTAMP:20260503T102019
CREATED:20220727T180152Z
LAST-MODIFIED:20220909T185603Z
UID:13784-1663200000-1663372799@mentorsafety.com
SUMMARY:In-Class JHSC Part 2 (September 15-16) -London
DESCRIPTION:Course Length: 2 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/2″ center=”no” class=””]\nDay 1 of 2 \n\nEmergency Preparedness\nIndoor Air Quality\nManual Material Handling\nSlip\, Trips and Falls\n\n[/su_column]\n[su_column size=”1/2″ center=”no” class=””]\nDay 2 of 2 \n\nCustomers\nBasic Electrical Safety\nViolence\, Stress and Harassment\nWorkplace Hazards and WHMIS/GHS\nHot and Cold\nCreating Action Plans and Recommendations\n\n[/su_column]\n[/su_row]\nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/in-class-jhsc-part-2-sept-16/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Joint Health and Safety Committee (Part 2)
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220917T083000
DTEND;TZID=UTC:20220917T123000
DTSTAMP:20260503T102019
CREATED:20220727T141141Z
LAST-MODIFIED:20220727T141518Z
UID:13645-1663403400-1663417800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 17\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-17/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220919T083000
DTEND;TZID=UTC:20220919T163000
DTSTAMP:20260503T102019
CREATED:20220727T170651Z
LAST-MODIFIED:20220727T171037Z
UID:13733-1663576200-1663605000@mentorsafety.com
SUMMARY:London Working At Heights (September 19\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-sept-19-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220923T083000
DTEND;TZID=UTC:20220923T123000
DTSTAMP:20260503T102019
CREATED:20220727T141801Z
LAST-MODIFIED:20220727T141955Z
UID:13649-1663921800-1663936200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 23\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-23-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220926T083000
DTEND;TZID=UTC:20220926T163000
DTSTAMP:20260503T102019
CREATED:20220727T171429Z
LAST-MODIFIED:20220727T172002Z
UID:13737-1664181000-1664209800@mentorsafety.com
SUMMARY:London Working At Heights (September 26\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-sept-26/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220927T083000
DTEND;TZID=UTC:20220927T163000
DTSTAMP:20260503T102019
CREATED:20220727T152535Z
LAST-MODIFIED:20220727T153114Z
UID:13701-1664267400-1664296200@mentorsafety.com
SUMMARY:London Confined Space Operation Level (September 27\, 2022)
DESCRIPTION:Program Length – 8 hours – 8:30 am – 4:30 pm\nCourse Fees – $225.00 + HST \nCourse Content \n\nRecognize and describe a confined space\nDescribe confined space hazards\nReview OHSA and regulations for confined space\nDescribe various hazard handling techniques\nUnderstanding the permit system\nUnderstand basic rescue\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-confined-space-operation-level-sept-27/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Confined Space Entry,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/confined-space-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220928T083000
DTEND;TZID=UTC:20220928T163000
DTSTAMP:20260503T102019
CREATED:20220727T154548Z
LAST-MODIFIED:20220727T154849Z
UID:13713-1664353800-1664382600@mentorsafety.com
SUMMARY:London Mobile Elevated Work Platform - Operations Level (September 28\, 2022)
DESCRIPTION:The course content will provide workers with an understanding of the basic principles needed to operate elevating work platform equipment. Classroom training will give workers both the knowledge and the practical hands-on training they need to develop safe operating behaviours and techniques. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $200.00 + HST \nCourse Content: \n\nIntroduction\nGeneral Information\nSafe Operation Standards\nElevating Work Platform Operating Procedures\nMaintenance Guidelines\n\nAll necessary training equipment is provided by Mentor Safety. \nMentor Safety uses a SJ3 4620 Skyjack Scissor Lift for the practical portion of the training. Remember: It is the employer’s responsibility to provide additional site-specific training to the operator before using any elevated work platform. \nWho would benefit: This training program is designed to protect the health and safety of workers on the job site who could reasonably expect to undertake work activities that involve the operation of an elevated work platform. \nWe can come to your location or you can come to our new Industrial Safety Training Center. Contact us today for your price.
URL:https://mentorsafety.com/training-course/london-elevated-work-platform-sept-28/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Elevated Work Platform Operator,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/elevated-work-platform-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220930T083000
DTEND;TZID=UTC:20220930T123000
DTSTAMP:20260503T102019
CREATED:20220727T142020Z
LAST-MODIFIED:20220727T142227Z
UID:13653-1664526600-1664541000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 30\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-30/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
END:VCALENDAR