BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Mentor Safety Consultants - A Safety Co Partner - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://mentorsafety.com
X-WR-CALDESC:Events for Mentor Safety Consultants - A Safety Co Partner
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20220601T083000
DTEND;TZID=UTC:20220601T163000
DTSTAMP:20260503T151847
CREATED:20220209T172522Z
LAST-MODIFIED:20220530T193757Z
UID:12157-1654072200-1654101000@mentorsafety.com
SUMMARY:London Working At Heights (June 1\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-june-1-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220604T083000
DTEND;TZID=UTC:20220604T123000
DTSTAMP:20260503T151847
CREATED:20220209T195043Z
LAST-MODIFIED:20220209T195238Z
UID:12200-1654331400-1654345800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 4\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-4-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220606T083000
DTEND;TZID=UTC:20220606T163000
DTSTAMP:20260503T151847
CREATED:20220209T172805Z
LAST-MODIFIED:20220209T173429Z
UID:12161-1654504200-1654533000@mentorsafety.com
SUMMARY:London Working At Heights (June 6\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-june-6-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220607T083000
DTEND;TZID=UTC:20220607T163000
DTSTAMP:20260503T151847
CREATED:20220303T145644Z
LAST-MODIFIED:20220303T145818Z
UID:12444-1654590600-1654619400@mentorsafety.com
SUMMARY:Niagara Working At Heights (June 7\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Niagara Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $150.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants are required to pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open-toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or\, at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nGreater Niagara Training Facility\nOur newest facility has been conveniently located at the heart of the Greater Niagara Region so that we can service clients from all over the region. We provide all the necessary training equipment at our facility and focus on a hands-on learning environment.
URL:https://mentorsafety.com/training-course/niagara-working-at-heights-training-program-june-7-2/
LOCATION:Stamford Center Firemen’s Park\, 2275 Dorchester Rd\, Rear Entrance\, Niagara Falls\, Ontario\, L2E 6S4\, Canada
CATEGORIES:Greater Niagara Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220610T083000
DTEND;TZID=UTC:20220610T123000
DTSTAMP:20260503T151847
CREATED:20220209T195329Z
LAST-MODIFIED:20220209T195524Z
UID:12204-1654849800-1654864200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 10\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-10/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220613T083000
DTEND;TZID=UTC:20220613T163000
DTSTAMP:20260503T151847
CREATED:20220209T174044Z
LAST-MODIFIED:20220209T174216Z
UID:12165-1655109000-1655137800@mentorsafety.com
SUMMARY:London Working At Heights (June 13\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-june-13/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220615
DTEND;VALUE=DATE:20220618
DTSTAMP:20260503T151847
CREATED:20220209T154058Z
LAST-MODIFIED:20220209T154313Z
UID:12099-1655251200-1655510399@mentorsafety.com
SUMMARY:Virtual JHSC Part 1 (June 15-17\, 2022)
DESCRIPTION:Course Length: 3 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nVirtual Learning: This is a situation in which the instructor and learners are separated by location. By the use of webcams\, the instructor will lead the training in real-time and will move through the learning outcomes together with the learners virtually. \nTechnology Requirements: The class will be hosted using Zoom and participants will need to use a webcam for certain parts of the training such as I.D verification and engagement monitoring. \nParticipants will need:\n-A quality internet connection\n-A computer (laptop\, desktop or tablet)\n-A webcam with a microphone \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/3″ center=”no” class=””] \nDay 1 of 3 \n\nIRS\nLaw & Regulations\nMethods of Enforcement\nRights & Responsibilities\nThree Rights (know\, participate\, refuse)\nPolicies\, Procedures & Programs\nJHSC\nCertified Members[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 2 of 3 \n\nRACE\nHealth Hazards\nSafety Hazards\nPEMEP\nRoutes Of Entry\nRecognizing the Hazards\nInspections\nExposure Monitoring[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 3 of 3 \n\nHazard Assessment\nJob Hazard Analysis\nExposure Monitoring\nControlling Hazards\nMLTSD Investigations\nHealth and Safety Resources\nMinistry of Labour Final Examination[/su_column]\n[/su_row]\n\nShipping Details: We will ship each participant a package with the required materials for the program. Participants must register 5 business days prior to the class and provide a shipping address. \nNote: In-class and group sessions can be booked either at our training location in London\, Niagara\, or at your location. Contact Mentor Safety for details. \n 
URL:https://mentorsafety.com/training-course/virtual-jhsc-part-1-june-17/
LOCATION:Virtual Classroom\, Ontario\, Canada
CATEGORIES:Greater London Area,Greater Niagara Area,Virtual Classroom,Virtual Joint Health and Safety Committee Part 1
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220618T083000
DTEND;TZID=UTC:20220618T163000
DTSTAMP:20260503T151847
CREATED:20220209T174243Z
LAST-MODIFIED:20220209T174448Z
UID:12169-1655541000-1655569800@mentorsafety.com
SUMMARY:London Working At Heights (June 18\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-june-18/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220620T083000
DTEND;TZID=UTC:20220620T123000
DTSTAMP:20260503T151847
CREATED:20220209T195718Z
LAST-MODIFIED:20220615T194845Z
UID:12207-1655713800-1655728200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 20\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-20/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220623
DTEND;VALUE=DATE:20220625
DTSTAMP:20260503T151847
CREATED:20220209T150316Z
LAST-MODIFIED:20220209T151407Z
UID:12087-1655942400-1656115199@mentorsafety.com
SUMMARY:Virtual JHSC Part 2 (June 23-24\, 2022)
DESCRIPTION:Course Length: 2 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nVirtual Learning: This is a situation in which the instructor and learners are separated by location. By the use of webcams\, the instructor will lead the training in real-time and will move through the learning outcomes together with the learners virtually. \nTechnology Requirements: The class will be hosted using Zoom and participants will need to use a webcam for certain parts of the training such as I.D verification and engagement monitoring. \nParticipants will need:\n-A quality internet connection\n-A computer (laptop\, desktop or tablet)\n-A webcam with a microphone \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training\, and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on\, and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/2″ center=”no” class=””]\nDay 1 of 2 \n\nEmergency Preparedness\nWHMIS/GHS 2015\nWorkplace Violence &Harassment\nErgonomics\n\n[/su_column]\n[su_column size=”1/2″ center=”no” class=””]\nDay 2 of 2 \n\nSlips\, Trips\, and Falls\nBasic Electrical Safety\nInfectious Disease\nCreating Action Plans and Recommendations\n\n[/su_column]\n[/su_row] \nShipping Details: We will ship each participant a package with the required materials for the program. Participants must register 5 business days prior to the class and provide a shipping address. \nNote: In-class and group sessions can be booked either at our training location in London\, Niagara\, or at your location. Contact Mentor Safety for details. \n 
URL:https://mentorsafety.com/training-course/virtual-jhsc-part-2-june-24-2/
LOCATION:Virtual Classroom\, Ontario\, Canada
CATEGORIES:Greater London Area,Greater Niagara Area,Virtual Classroom,Virtual Joint Health and Safety Committee Part 2
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220624T083000
DTEND;TZID=UTC:20220624T163000
DTSTAMP:20260503T151847
CREATED:20220209T174526Z
LAST-MODIFIED:20220209T174638Z
UID:12173-1656059400-1656088200@mentorsafety.com
SUMMARY:London Working At Heights (June 24\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-june-24-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220627T083000
DTEND;TZID=UTC:20220627T123000
DTSTAMP:20260503T151847
CREATED:20220209T195918Z
LAST-MODIFIED:20220526T161056Z
UID:12211-1656318600-1656333000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 27\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-27/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220628T083000
DTEND;TZID=UTC:20220628T163000
DTSTAMP:20260503T151847
CREATED:20220209T144233Z
LAST-MODIFIED:20220602T191228Z
UID:12074-1656405000-1656433800@mentorsafety.com
SUMMARY:Mobile London Elevated Work Platform - Operations Level (June 28\, 2022)
DESCRIPTION:The course content will provide workers with an understanding of the basic principles needed to operate elevating work platform equipment. Classroom training will give workers both the knowledge and the practical hands-on training they need to develop safe operating behaviours and techniques. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $200.00 + HST \nCourse Content: \n\nIntroduction\nGeneral Information\nSafe Operation Standards\nElevating Work Platform Operating Procedures\nMaintenance Guidelines\n\nAll necessary training equipment is provided by Mentor Safety. \nMentor Safety uses a SJ3 4620 Skyjack Scissor Lift for the practical portion of the training. Remember: It is the employer’s responsibility to provide additional site-specific training to the operator before using any elevated work platform. \nWho would benefit: This training program is designed to protect the health and safety of workers on the job site who could reasonably expect to undertake work activities that involve the operation of an elevated work platform. \nWe can come to your location or you can come to our new Industrial Safety Training Center. Contact us today for your price.
URL:https://mentorsafety.com/training-course/london-elevated-work-platform-june-28/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Elevated Work Platform Operator,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/elevated-work-platform-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220629T083000
DTEND;TZID=UTC:20220629T163000
DTSTAMP:20260503T151847
CREATED:20220209T142308Z
LAST-MODIFIED:20220209T142422Z
UID:12053-1656491400-1656520200@mentorsafety.com
SUMMARY:London Forklift Training Program  (June 29\, 2022)
DESCRIPTION:Program Length – 8 hours* \nProgram Objectives: The purpose of this training is to provide employees with Forklift Truck operator safety training prescribed by legislation so they may obtain the ability to operate equipment in a safe\, competent manner and work safely in their work environment and around other employees. \nAt the end of the training session\, all participants who pass the training will receive a Class 1\, 4\, 5 Forklift certification (and wallet card) which is valid for 3 years to the date of issuance. \nCourse Content:\nThis training will help you: \n\nUnderstanding of the theory and principles involved in the safe operation of a forklift truck;\nKnow your legal responsibilities in forklift truck operation;\nTo recognize hazards associated with forklift truck operation and to recommend or suggest solutions; and\nTo verify practical knowledge of course content & Skills Evaluation\n\nThis training program will certify participants in lifting classes 1\, 4\, and 5. \nThe program allows participants the opportunity to learn about topics such as: \n\nIndustrial Truck Association (ITA) Classes\nComponents of forklifts\nUnderstanding load capacity\nPrinciples of forklift stability\nSafe operation of forklifts\nRefueling procedures (battery\, propane\, gas\, diesel)\nProvincial and Federal legislation\nCSA Guidelines\nPre-operational inspections\nPractical training (hands-on forklift operation)\n\nWho would benefit: Our forklift training program has been designed for those with an occupational requirement to be trained in and understand the safe operation of a forklift. \nRegulations and Guidelines: The program is designed to protect the health and safety of workers in the workplace and developed in accordance with the requirements of the OH&S and the Canadian Standards Association (CSA). \nAll practical training at the Mentor Safety Training Centre will be completed using an electric (Class 1) sit-down\, counterbalanced forklift. Although participants will learn about the steps involved in a propane tank exchange\, a practical verification of knowledge will not be possible. Therefore\, we highly recommend that site-specific training be offered on propane tank exchange for any participants who will be required to operate a propane-powered forklift. \nNote: All participants must wear CSA-approved safety shoes/boots and must provide a valid photo ID. \nGroup sessions can be booked both at our training location in Belmont or at a remote location closer to you. Contact Mentor Safety for details. \n*Program length may vary depending on attendance \n\n 
URL:https://mentorsafety.com/training-course/forklift-training-program-june-29/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Forklift Training Program,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/05/forklift-training-program.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220630T083000
DTEND;TZID=UTC:20220630T163000
DTSTAMP:20260503T151847
CREATED:20220209T143220Z
LAST-MODIFIED:20220209T143436Z
UID:12063-1656577800-1656606600@mentorsafety.com
SUMMARY:London Confined Space Operation Level (June 30\, 2022)
DESCRIPTION:Program Length – 8 hours – 8:30 am – 4:30 pm\nCourse Fees – $225.00 + HST \nCourse Content \n\nRecognize and describe a confined space\nDescribe confined space hazards\nReview OHSA and regulations for confined space\nDescribe various hazard handling techniques\nUnderstanding the permit system\nUnderstand basic rescue\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-confined-space-operation-level-june-30/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Confined Space Entry,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/confined-space-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
END:VCALENDAR