BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Mentor Safety Consultants - A Safety Co Partner - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://mentorsafety.com
X-WR-CALDESC:Events for Mentor Safety Consultants - A Safety Co Partner
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20220402T083000
DTEND;TZID=UTC:20220402T123000
DTSTAMP:20260503T185611
CREATED:20220209T162428Z
LAST-MODIFIED:20220209T162901Z
UID:12124-1648888200-1648902600@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 2\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220404T083000
DTEND;TZID=UTC:20220404T163000
DTSTAMP:20260503T185611
CREATED:20220209T160632Z
LAST-MODIFIED:20220209T161859Z
UID:12116-1649061000-1649089800@mentorsafety.com
SUMMARY:London Working At Heights (April 4\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-april-4/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220405T083000
DTEND;TZID=UTC:20220405T163000
DTSTAMP:20260503T185611
CREATED:20220303T142250Z
LAST-MODIFIED:20220303T143002Z
UID:12436-1649147400-1649176200@mentorsafety.com
SUMMARY:Niagara Working At Heights (April 5\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Niagara Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $150.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants are required to pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open-toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or\, at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nGreater Niagara Training Facility\nOur newest facility has been conveniently located at the heart of the Greater Niagara Region so that we can service clients from all over the region. We provide all the necessary training equipment at our facility and focus on a hands-on learning environment.
URL:https://mentorsafety.com/training-course/niagara-working-at-heights-training-program-april-5/
LOCATION:Stamford Center Firemen’s Park\, 2275 Dorchester Rd\, Rear Entrance\, Niagara Falls\, Ontario\, L2E 6S4\, Canada
CATEGORIES:Greater Niagara Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220406
DTEND;VALUE=DATE:20220409
DTSTAMP:20260503T185611
CREATED:20220209T151834Z
LAST-MODIFIED:20220209T152125Z
UID:12091-1649203200-1649462399@mentorsafety.com
SUMMARY:Virtual JHSC Part 1 (April 6-8\, 2022)
DESCRIPTION:Course Length: 3 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nVirtual Learning: This is a situation in which the instructor and learners are separated by location. By the use of webcams\, the instructor will lead the training in real-time and will move through the learning outcomes together with the learners virtually. \nTechnology Requirements: The class will be hosted using Zoom and participants will need to use a webcam for certain parts of the training such as I.D verification and engagement monitoring. \nParticipants will need:\n-A quality internet connection\n-A computer (laptop\, desktop or tablet)\n-A webcam with a microphone \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/3″ center=”no” class=””] \nDay 1 of 3 \n\nIRS\nLaw & Regulations\nMethods of Enforcement\nRights & Responsibilities\nThree Rights (know\, participate\, refuse)\nPolicies\, Procedures & Programs\nJHSC\nCertified Members[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 2 of 3 \n\nRACE\nHealth Hazards\nSafety Hazards\nPEMEP\nRoutes Of Entry\nRecognizing the Hazards\nInspections\nExposure Monitoring[/su_column]\n[su_column size=”1/3″ center=”no” class=””]\n\nDay 3 of 3 \n\nHazard Assessment\nJob Hazard Analysis\nExposure Monitoring\nControlling Hazards\nMLTSD Investigations\nHealth and Safety Resources\nMinistry of Labour Final Examination[/su_column]\n[/su_row]\n\nShipping Details: We will ship each participant a package with the required materials for the program. Participants must register 5 business days prior to the class and provide a shipping address. \nNote: In-class and group sessions can be booked either at our training location in London\, Niagara\, or at your location. Contact Mentor Safety for details. \n 
URL:https://mentorsafety.com/training-course/virtual-jhsc-part-1-april-8/
LOCATION:Virtual Classroom\, Ontario\, Canada
CATEGORIES:Greater London Area,Greater Niagara Area,Virtual Classroom,Virtual Joint Health and Safety Committee Part 1
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220406T083000
DTEND;TZID=UTC:20220406T123000
DTSTAMP:20260503T185611
CREATED:20220303T145915Z
LAST-MODIFIED:20220303T150309Z
UID:12448-1649233800-1649248200@mentorsafety.com
SUMMARY:Niagara Working At Heights Refresher (April 6\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open-toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nGreater Niagara Training Facility\nOur newest facility has been conveniently located at the heart of the Greater Niagara Region so that we can service clients from all over the region. We provide all the necessary training equipment at our facility and focus on a hands-on learning environment. \n25km (30 minutes) from Niagara \n20km (20 minutes) from St. Catherines \n25km (30 minutes) from Port. Colborne \n10km (15 minutes) from Welland \n60km (50 minutes) from Hamilton
URL:https://mentorsafety.com/training-course/niagara-working-at-heights-refresher-april-6/
LOCATION:Stamford Center Firemen’s Park\, 2275 Dorchester Rd\, Rear Entrance\, Niagara Falls\, Ontario\, L2E 6S4\, Canada
CATEGORIES:Greater Niagara Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220408T083000
DTEND;TZID=UTC:20220408T123000
DTSTAMP:20260503T185611
CREATED:20220209T190938Z
LAST-MODIFIED:20220209T191400Z
UID:12176-1649406600-1649421000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 8\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-8-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220411T083000
DTEND;TZID=UTC:20220411T163000
DTSTAMP:20260503T185611
CREATED:20220209T162013Z
LAST-MODIFIED:20220209T162327Z
UID:12120-1649665800-1649694600@mentorsafety.com
SUMMARY:London Working At Heights (April 11\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-april-11/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220413T083000
DTEND;TZID=UTC:20220413T123000
DTSTAMP:20260503T185611
CREATED:20220209T191444Z
LAST-MODIFIED:20220209T191648Z
UID:12180-1649838600-1649853000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 13\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-13/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220414T083000
DTEND;TZID=UTC:20220414T163000
DTSTAMP:20260503T185611
CREATED:20220323T121800Z
LAST-MODIFIED:20220323T122004Z
UID:12669-1649925000-1649953800@mentorsafety.com
SUMMARY:London Elevated Work Platform - Operations Level (April 14\, 2022)
DESCRIPTION:The course content will provide workers with an understanding of the basic principles needed to operate elevating work platform equipment. Classroom training will give workers both the knowledge and the practical hands-on training they need to develop safe operating behaviours and techniques. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $200.00 + HST \nCourse Content: \n\nIntroduction\nGeneral Information\nSafe Operation Standards\nElevating Work Platform Operating Procedures\nMaintenance Guidelines\n\nAll necessary training equipment is provided by Mentor Safety. \nMentor Safety uses a SJ3 4620 Skyjack Scissor Lift for the practical portion of the training. Remember: It is the employer’s responsibility to provide additional site-specific training to the operator before using any elevated work platform. \nWho would benefit: This training program is designed to protect the health and safety of workers on the job site who could reasonably expect to undertake work activities that involve the operation of an elevated work platform. \nWe can come to your location or you can come to our new Industrial Safety Training Center. Contact us today for your price.
URL:https://mentorsafety.com/training-course/london-elevated-work-platform-april-14/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Elevated Work Platform Operator,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/elevated-work-platform-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220418T083000
DTEND;TZID=UTC:20220418T123000
DTSTAMP:20260503T185611
CREATED:20220209T192006Z
LAST-MODIFIED:20220209T192403Z
UID:12184-1650270600-1650285000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 18\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-18/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220421
DTEND;VALUE=DATE:20220423
DTSTAMP:20260503T185611
CREATED:20220209T144554Z
LAST-MODIFIED:20220209T144833Z
UID:12078-1650499200-1650671999@mentorsafety.com
SUMMARY:Virtual JHSC Part 2 (April 21-22\, 2022)
DESCRIPTION:Course Length: 2 Days\nCourse Hours: 8:30 am – 4:30 pm – 8 Hours Each Day * \nVirtual Learning: This is a situation in which the instructor and learners are separated by location. By the use of webcams\, the instructor will lead the training in real-time and will move through the learning outcomes together with the learners virtually. \nTechnology Requirements: The class will be hosted using Zoom and participants will need to use a webcam for certain parts of the training such as I.D verification and engagement monitoring. \nParticipants will need:\n-A quality internet connection\n-A computer (laptop\, desktop or tablet)\n-A webcam with a microphone \nCourse Description: Approved by The Chief Prevention Officer of the Ministry of Labour\, Training\, and Skills Development. Our lead instructor for this program has been an active member of a JHSC for over 28 years and brings a wealth of health and safety knowledge and practical experience to the program. We won’t be reading out of a textbook in this program. Our program is dynamic\, interactive\, hands-on\, and guaranteed to be a great learning experience. \n[su_row class=””]\n[su_column size=”1/2″ center=”no” class=””]\nDay 1 of 2 \n\nEmergency Preparedness\nWHMIS/GHS 2015\nWorkplace Violence &Harassment\nErgonomics\n\n[/su_column]\n[su_column size=”1/2″ center=”no” class=””]\nDay 2 of 2 \n\nSlips\, Trips\, and Falls\nBasic Electrical Safety\nInfectious Disease\nCreating Action Plans and Recommendations\n\n[/su_column]\n[/su_row] \nShipping Details: We will ship each participant a package with the required materials for the program. Participants must register 5 business days prior to the class and provide a shipping address. \nNote: In-class and group sessions can be booked either at our training location in London\, Niagara\, or at your location. Contact Mentor Safety for details. \n 
URL:https://mentorsafety.com/training-course/virtual-jhsc-part-2-april-22-2/
LOCATION:Virtual Classroom\, Ontario\, Canada
CATEGORIES:Greater London Area,Greater Niagara Area,Virtual Classroom,Virtual Joint Health and Safety Committee Part 2
ATTACH;FMTTYPE=image/png:https://mentorsafety.com/wp-content/uploads/2021/06/Chief-Prevention-Officer-Approved-e1624461696277.png
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220422T083000
DTEND;TZID=UTC:20220422T163000
DTSTAMP:20260503T185611
CREATED:20220209T163101Z
LAST-MODIFIED:20220209T164401Z
UID:12131-1650616200-1650645000@mentorsafety.com
SUMMARY:London Working At Heights (April 22\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-april-22/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220425T083000
DTEND;TZID=UTC:20220425T163000
DTSTAMP:20260503T185611
CREATED:20220309T165359Z
LAST-MODIFIED:20220309T165605Z
UID:12510-1650875400-1650904200@mentorsafety.com
SUMMARY:London Working At Heights (April 25\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-april-25/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220426T083000
DTEND;TZID=UTC:20220426T163000
DTSTAMP:20260503T185611
CREATED:20220209T142637Z
LAST-MODIFIED:20220316T180013Z
UID:12056-1650961800-1650990600@mentorsafety.com
SUMMARY:London Confined Space Entry (April 26\, 2022)
DESCRIPTION:Program Length – 8 hours – 8:30 am – 4:30 pm\nCourse Fees – $225.00 + HST \nCourse Content \n\nRecognize and describe a confined space\nDescribe confined space hazards\nReview OHSA and regulations for confined space\nDescribe various hazard handling techniques\nUnderstanding the permit system\nUnderstand basic rescue\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-confined-space-entry-april-26/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Confined Space Entry,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/confined-space-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220427T083000
DTEND;TZID=UTC:20220427T163000
DTSTAMP:20260503T185611
CREATED:20220209T141004Z
LAST-MODIFIED:20220209T141754Z
UID:12045-1651048200-1651077000@mentorsafety.com
SUMMARY:London Forklift Training Program  (April 27\, 2022)
DESCRIPTION:Program Length – 8 hours* \nProgram Objectives: The purpose of this training is to provide employees with Forklift Truck operator safety training prescribed by legislation so they may obtain the ability to operate equipment in a safe\, competent manner and work safely in their work environment and around other employees. \nAt the end of the training session\, all participants who pass the training will receive a Class 1\, 4\, 5 Forklift certification (and wallet card) which is valid for 3 years to the date of issuance. \nCourse Content:\nThis training will help you: \n\nUnderstanding of the theory and principles involved in the safe operation of a forklift truck;\nKnow your legal responsibilities in forklift truck operation;\nTo recognize hazards associated with forklift truck operation and to recommend or suggest solutions; and\nTo verify practical knowledge of course content & Skills Evaluation\n\nThis training program will certify participants in lifting classes 1\, 4\, and 5. \nThe program allows participants the opportunity to learn about topics such as: \n\nIndustrial Truck Association (ITA) Classes\nComponents of forklifts\nUnderstanding load capacity\nPrinciples of forklift stability\nSafe operation of forklifts\nRefueling procedures (battery\, propane\, gas\, diesel)\nProvincial and Federal legislation\nCSA Guidelines\nPre-operational inspections\nPractical training (hands-on forklift operation)\n\nWho would benefit: Our forklift training program has been designed for those with an occupational requirement to be trained in and understand the safe operation of a forklift. \nRegulations and Guidelines: The program is designed to protect the health and safety of workers in the workplace and developed in accordance with the requirements of the OH&S and the Canadian Standards Association (CSA). \nAll practical training at the Mentor Safety Training Centre will be completed using an electric (Class 1) sit-down\, counterbalanced forklift. Although participants will learn about the steps involved in a propane tank exchange\, a practical verification of knowledge will not be possible. Therefore\, we highly recommend that site-specific training be offered on propane tank exchange for any participants who will be required to operate a propane-powered forklift. \nNote: All participants must wear CSA-approved safety shoes/boots and must provide a valid photo ID. \nGroup sessions can be booked both at our training location in Belmont or at a remote location closer to you. Contact Mentor Safety for details. \n*Program length may vary depending on attendance \n\n 
URL:https://mentorsafety.com/training-course/forklift-training-program-april-27-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Forklift Training Program,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/05/forklift-training-program.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220428T083000
DTEND;TZID=UTC:20220428T163000
DTSTAMP:20260503T185611
CREATED:20220209T143637Z
LAST-MODIFIED:20220209T143907Z
UID:12067-1651134600-1651163400@mentorsafety.com
SUMMARY:London Elevated Work Platform - Operations Level (April 28\, 2022)
DESCRIPTION:The course content will provide workers with an understanding of the basic principles needed to operate elevating work platform equipment. Classroom training will give workers both the knowledge and the practical hands-on training they need to develop safe operating behaviours and techniques. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $200.00 + HST \nCourse Content: \n\nIntroduction\nGeneral Information\nSafe Operation Standards\nElevating Work Platform Operating Procedures\nMaintenance Guidelines\n\nAll necessary training equipment is provided by Mentor Safety. \nMentor Safety uses a SJ3 4620 Skyjack Scissor Lift for the practical portion of the training. Remember: It is the employer’s responsibility to provide additional site-specific training to the operator before using any elevated work platform. \nWho would benefit: This training program is designed to protect the health and safety of workers on the job site who could reasonably expect to undertake work activities that involve the operation of an elevated work platform. \nWe can come to your location or you can come to our new Industrial Safety Training Center. Contact us today for your price.
URL:https://mentorsafety.com/training-course/london-elevated-work-platform-april-28/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Elevated Work Platform Operator,Greater London Area
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/06/elevated-work-platform-1.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220430T083000
DTEND;TZID=UTC:20220430T163000
DTSTAMP:20260503T185611
CREATED:20220209T164511Z
LAST-MODIFIED:20220209T164808Z
UID:12138-1651307400-1651336200@mentorsafety.com
SUMMARY:London Working At Heights (April 30\, 2022)
DESCRIPTION:Since April 1\, 2015\, a mandatory Chief Prevention Officer approved Working at Heights Training Program has been required by workers in the construction sector. \nThe Chief Prevention Officer of the Ministry of Labour has approved Mentor Safety’s Working at Heights Training Program. \nProgram Length – 8 hours – 8:30 am – 4:30 PM\nCourse Fees – $180.00 + HST \nModule 1: Working at Heights Basic Theory Module \n\nRights and Responsibilities\nIdentification of the Hazards of Working at Heights\nEliminating or Controlling the Hazards of Working at Heights\nWarning Methods and Physical Barriers\nLadders and Similar Equipment\nPersonal Fall Protection Equipment\n\nModule 2: Working at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nAccommodations\nAccommodations available upon request. \nCOVID-19 Protocol: Upon entering our facility for training you will have to follow our COVID Protocols in order to participant in the training. This includes sanitizing your hands upon entry\, filling out a COVID questionnaire\, passing a temperature check using a Seek Scan device\, and wearing a face mask as directed. If you need any accommodations\, please let us know in advance so we can ensure our environment is inclusive.
URL:https://mentorsafety.com/training-course/london-working-at-heights-training-program-april-30/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
END:VCALENDAR