BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Mentor Safety Consultants - A Safety Co Partner - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://mentorsafety.com
X-WR-CALDESC:Events for Mentor Safety Consultants - A Safety Co Partner
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20221024T083000
DTEND;TZID=UTC:20221024T123000
DTSTAMP:20260509T121759
CREATED:20220727T144059Z
LAST-MODIFIED:20220727T144331Z
UID:13669-1666600200-1666614600@mentorsafety.com
SUMMARY:London Working At Heights Refresher (October 24\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-oct-24/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20221021T083000
DTEND;TZID=UTC:20221021T123000
DTSTAMP:20260509T121759
CREATED:20220727T143039Z
LAST-MODIFIED:20220727T143727Z
UID:13665-1666341000-1666355400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (October 21\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-oct-21/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20221015T083000
DTEND;TZID=UTC:20221015T123000
DTSTAMP:20260509T121759
CREATED:20220727T142534Z
LAST-MODIFIED:20220727T142938Z
UID:13661-1665822600-1665837000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (October 15\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-oct-15/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20221003T083000
DTEND;TZID=UTC:20221003T123000
DTSTAMP:20260509T121759
CREATED:20220727T142257Z
LAST-MODIFIED:20220727T142429Z
UID:13657-1664785800-1664800200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (October 3\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-oct-3/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220930T083000
DTEND;TZID=UTC:20220930T123000
DTSTAMP:20260509T121759
CREATED:20220727T142020Z
LAST-MODIFIED:20220727T142227Z
UID:13653-1664526600-1664541000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 30\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-30/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220923T083000
DTEND;TZID=UTC:20220923T123000
DTSTAMP:20260509T121759
CREATED:20220727T141801Z
LAST-MODIFIED:20220727T141955Z
UID:13649-1663921800-1663936200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 23\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-23-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220917T083000
DTEND;TZID=UTC:20220917T123000
DTSTAMP:20260509T121759
CREATED:20220727T141141Z
LAST-MODIFIED:20220727T141518Z
UID:13645-1663403400-1663417800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 17\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-17/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220906T083000
DTEND;TZID=UTC:20220906T123000
DTSTAMP:20260509T121759
CREATED:20220727T135036Z
LAST-MODIFIED:20220727T140105Z
UID:13639-1662453000-1662467400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (September 6\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-sept-6/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220826T083000
DTEND;TZID=UTC:20220826T123000
DTSTAMP:20260509T121759
CREATED:20220511T165058Z
LAST-MODIFIED:20220822T165309Z
UID:13066-1661502600-1661517000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (August 26\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-aug-26/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220820T083000
DTEND;TZID=UTC:20220820T123000
DTSTAMP:20260509T121759
CREATED:20220511T164816Z
LAST-MODIFIED:20220511T165034Z
UID:13063-1660984200-1660998600@mentorsafety.com
SUMMARY:London Working At Heights Refresher (August 20\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-aug-20/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220808T083000
DTEND;TZID=UTC:20220808T123000
DTSTAMP:20260509T121759
CREATED:20220511T164448Z
LAST-MODIFIED:20220511T164749Z
UID:13059-1659947400-1659961800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (August 8\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-aug-8/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220725T083000
DTEND;TZID=UTC:20220725T123000
DTSTAMP:20260509T121759
CREATED:20220511T163849Z
LAST-MODIFIED:20220511T164033Z
UID:13052-1658737800-1658752200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (July 25\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-july-25-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220719T083000
DTEND;TZID=UTC:20220719T123000
DTSTAMP:20260509T121759
CREATED:20220511T163135Z
LAST-MODIFIED:20220607T192255Z
UID:13044-1658219400-1658233800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (July 19\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-july-19-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220708T083000
DTEND;TZID=UTC:20220708T123000
DTSTAMP:20260509T121759
CREATED:20220511T162713Z
LAST-MODIFIED:20220511T162920Z
UID:13040-1657269000-1657283400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (July 8\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-july-8/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220627T083000
DTEND;TZID=UTC:20220627T123000
DTSTAMP:20260509T121759
CREATED:20220209T195918Z
LAST-MODIFIED:20220526T161056Z
UID:12211-1656318600-1656333000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 27\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-27/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220620T083000
DTEND;TZID=UTC:20220620T123000
DTSTAMP:20260509T121759
CREATED:20220209T195718Z
LAST-MODIFIED:20220615T194845Z
UID:12207-1655713800-1655728200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 20\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-20/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220610T083000
DTEND;TZID=UTC:20220610T123000
DTSTAMP:20260509T121759
CREATED:20220209T195329Z
LAST-MODIFIED:20220209T195524Z
UID:12204-1654849800-1654864200@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 10\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-10/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220604T083000
DTEND;TZID=UTC:20220604T123000
DTSTAMP:20260509T121759
CREATED:20220209T195043Z
LAST-MODIFIED:20220209T195238Z
UID:12200-1654331400-1654345800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (June 4\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-june-4-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220527T083000
DTEND;TZID=UTC:20220527T123000
DTSTAMP:20260509T121759
CREATED:20220209T193434Z
LAST-MODIFIED:20220209T194720Z
UID:12196-1653640200-1653654600@mentorsafety.com
SUMMARY:London Working At Heights Refresher (May 27\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-may-27/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220514T083000
DTEND;TZID=UTC:20220514T123000
DTSTAMP:20260509T121759
CREATED:20220209T192915Z
LAST-MODIFIED:20220209T193224Z
UID:12192-1652517000-1652531400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (May 14\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-may-14-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220509T083000
DTEND;TZID=UTC:20220509T123000
DTSTAMP:20260509T121759
CREATED:20220209T192522Z
LAST-MODIFIED:20220209T192653Z
UID:12188-1652085000-1652099400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (May 9\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-may-9/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220418T083000
DTEND;TZID=UTC:20220418T123000
DTSTAMP:20260509T121759
CREATED:20220209T192006Z
LAST-MODIFIED:20220209T192403Z
UID:12184-1650270600-1650285000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 18\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-18/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220413T083000
DTEND;TZID=UTC:20220413T123000
DTSTAMP:20260509T121759
CREATED:20220209T191444Z
LAST-MODIFIED:20220209T191648Z
UID:12180-1649838600-1649853000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 13\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-13/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220408T083000
DTEND;TZID=UTC:20220408T123000
DTSTAMP:20260509T121759
CREATED:20220209T190938Z
LAST-MODIFIED:20220209T191400Z
UID:12176-1649406600-1649421000@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 8\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-8-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220406T083000
DTEND;TZID=UTC:20220406T123000
DTSTAMP:20260509T121759
CREATED:20220303T145915Z
LAST-MODIFIED:20220303T150309Z
UID:12448-1649233800-1649248200@mentorsafety.com
SUMMARY:Niagara Working At Heights Refresher (April 6\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open-toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details. \nGreater Niagara Training Facility\nOur newest facility has been conveniently located at the heart of the Greater Niagara Region so that we can service clients from all over the region. We provide all the necessary training equipment at our facility and focus on a hands-on learning environment. \n25km (30 minutes) from Niagara \n20km (20 minutes) from St. Catherines \n25km (30 minutes) from Port. Colborne \n10km (15 minutes) from Welland \n60km (50 minutes) from Hamilton
URL:https://mentorsafety.com/training-course/niagara-working-at-heights-refresher-april-6/
LOCATION:Stamford Center Firemen’s Park\, 2275 Dorchester Rd\, Rear Entrance\, Niagara Falls\, Ontario\, L2E 6S4\, Canada
CATEGORIES:Greater Niagara Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220402T083000
DTEND;TZID=UTC:20220402T123000
DTSTAMP:20260509T121759
CREATED:20220209T162428Z
LAST-MODIFIED:20220209T162901Z
UID:12124-1648888200-1648902600@mentorsafety.com
SUMMARY:London Working At Heights Refresher (April 2\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-april-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220325T083000
DTEND;TZID=UTC:20220325T123000
DTSTAMP:20260509T121759
CREATED:20211203T180039Z
LAST-MODIFIED:20211203T180153Z
UID:11741-1648197000-1648211400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (March 25\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-march-25/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220321T083000
DTEND;TZID=UTC:20220321T123000
DTSTAMP:20260509T121759
CREATED:20211203T175822Z
LAST-MODIFIED:20211203T180014Z
UID:11738-1647851400-1647865800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (March 21\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-march-21/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220311T083000
DTEND;TZID=UTC:20220311T123000
DTSTAMP:20260509T121759
CREATED:20211203T175641Z
LAST-MODIFIED:20211203T175757Z
UID:11735-1646987400-1647001800@mentorsafety.com
SUMMARY:London Working At Heights Refresher (March 11\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-march-11/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220305T083000
DTEND;TZID=UTC:20220305T123000
DTSTAMP:20260509T121759
CREATED:20211203T175448Z
LAST-MODIFIED:20220215T202120Z
UID:11732-1646469000-1646483400@mentorsafety.com
SUMMARY:London Working At Heights Refresher (March 05\, 2022)
DESCRIPTION:Program Length – 4 hours – 8:30 am – 12:30 PM\nCourse Fees – $85.00 + HST \nWorking at heights training is valid for three (3) years from the date of successful completion of the original Chief Prevention Officer (CPO) approved program. All learners who wish to maintain the validity of their working at heights training past this three year period need to successfully complete refresher training. \nThe refresher training also will update learners on any legislative\, regulatory or equipment (technological) changes\, which may impact working at heights in construction. \n  \nWorking at Heights Practical Equipment Module \n\nBarriers and Safety Nets\nPersonal Fall Protection Equipment\nAnchor Points\nWork Positioning Systems\nWork Access Equipment and Platforms\nRescue Planning\n\n**PREREQUISITES REQUIRED: \nLearners must have successfully completed a full-day CPO approved Working at Heights program \nCPO Learners # is required. \nNo refunds will be provided for registrants that do not meet prerequisites. \nIn the event that a learner has lost their CPO-issued proof of completion card\, the learners can request a replacement card by calling the Ministry of Labour at 1-877-202-0008 \nEvaluation and Proof of Completion\nAll participants will be required to complete and pass a written test with a minimum mark of 75% and a practical test with a mark of 100%. Proof of completion will be provided. \nRequired: Photo I.D must be present at the beginning of class. Proper footwear is required\, no open toe shoes or high heeled shoes allowed. If you do not meet these requirements\, Mentor can refuse you access to the classroom and you will not receive a refund. \nAccommodations\nAccommodations available upon request. \nNote: Group sessions can be booked either at our training location in London\, Niagara or at your location. Contact Mentor Safety for details.
URL:https://mentorsafety.com/training-course/london-working-at-heights-refresher-march-5-2/
LOCATION:Greater London Area Location B\, 203 Exeter Rd\, Unit G\, London\, ON\, N6L 1A4\, Canada
CATEGORIES:Greater London Area,Working at Heights Refresher
ATTACH;FMTTYPE=image/jpeg:https://mentorsafety.com/wp-content/uploads/2018/04/working-at-heights-product-image.jpg
ORGANIZER;CN="Mentor Safety Consultants Inc.":MAILTO:admin@mentorsafety.com
END:VEVENT
END:VCALENDAR